Welcome to the Panbo Marine Technology Forums.
Last seen: March 28, 2024 4:09 pm
I think this is a fine place for it and comes with the benefit of pagination on posts. Makes reading a lot easier. -Ben S.
Bryan, The tablet I mentioned is the Orca Display 2 --Note that this tablet is specifically designed to work with Orca's app and Core. But, it's...
I believe you will find that the answer to question number one is yes, the Raymarine AP shouldn't have any troubles reading wind information from a B&...
We were able to get Jeff's troubles sorted out by reconfiguring the connection on the YDEG. From about 2005-2008 Volvo changed the pinout on D6 connec...
Hi Chris, Can you send an email to [email protected] with your engine serial numbers? Also, if you could either include pictures of whe...
Hi Tim, Do you know the model of Raymarine AIS you have? I think all Raymarine AIS units have been equipped with a SeaTalk NG interface. Assumin...
I found this Raymarine forum post with the pinout for Raynet cables:/p> I think that should give you what you need to get going on testing. ...
@wkearney99 I think you're right. I just double checked the E-Classic user guide and it only mentions Sirius audio control. I don't think the timing w...
@blurt My apologies, I'd made a mistake in posting the 63P had a J1708 interface. I've corrected that above. You're correct that the 63P doesn't have ...
Bruce, it doesn't use an NGT-1, but I run lots of data on test benches. Instead of simulated data, I use real data I've previously recorded. I use a Y...
@rkstump51, when you say steer the boat, can you elaborate a little more? Even with no integration between the autopilot and MFD you will get heading ...
Hi Dan, The TAMD-63P uses J1708 to communicate engine data. You can use a Yacht Devices YDES-04N () to convert from J1708 to NMEA 2000. But, be ...
It's an interesting product. Right now I don't have very good ways of testing alternators and regulators. I'm working on it and will definitely keep t...
Hi Geno, First, it's not possible to leverage the e125's internal WiFi to receive NMEA 2000 data. That's a limitation of the e125 (and most othe...
Hi Angelique and James, When you're connected to the WW directly, can you look at network preferences on your Mac? I'm hoping you can tell me th...