Welcome to the Panbo Marine Technology Forums.
Notifications
Clear all
General Marine Electronics
3
Posts
2
Users
0
Reactions
2,239
Views
Topic starter
April 30, 2023 2:18 pm
How would the NMEA instance of a Garmin MSC10 be found?
It is not reported on the Garmin MFD under Vessel > settings>NMEA200O Setup>Device List .
I would like to use parameters from the GPS as switches in CZONE - such as SOG, but need to input the correct device instance to make it happen
Would I need a NMEA sniffer, like actisense?
July 19, 2023 1:28 am
How would the NMEA instance of a Garmin MSC10 be found?
It is not reported on the Garmin MFD under Vessel > settings>NMEA200O Setup>Device List .
I would like to use parameters from the GPS as switches in CZONE - such as SOG, but need to input the correct device instance to make it happen
Would I need a NMEA sniffer, like actisense?
Hello,
To find the NMEA instance of a Garmin MSC10, if it's not reported on the MFD, you may need to use an NMEA sniffer like Actisense to capture the NMEA data and identify the correct instance. This is necessary to use parameters from the GPS, such as SOG, as switches in CZONE effectively.
Topic starter
July 25, 2023 2:32 pm
Thank you
