Welcome to the Panbo Marine Technology Forums.
Notifications
Clear all
General Marine Electronics
2
Posts
2
Users
0
Reactions
629
Views
Topic starter
February 26, 2025 4:07 pm
For 3 or 4 years I had my Vesper XB8000 and Axiom MFD playing nicely together. The setup had a boat Wifi network and the STNG bridge. AIS targets, NMEA 183 data and MFD data appeared on Aquamaps and WatchMate on an iPAD and AIS targets appeared on the MFD.
In the last couple of years I’ve had to replace my VHS/AIS antenna, upgraded the MFD and swapped and reconfigured the Wifi hardware. I must have missed some settings as I have not been been able to restore the AIS data display to the Axiom+. The tablet seems to show all the data from AIS and 183, so the messages are on part of the network.
Can someone suggest how to troubleshoot this? I suspect the Axiom configuration is wrong, but I may just be blaming the last configuration to arrive.
April 16, 2025 2:22 am
The tablet seems to show all the data from AIS and 183, so the messages are on part of the network. Can someone suggest how to troubleshoot this?It receives AIS data from a Vesper XB-8000 via STNG/NMEA2000 network. My problem is that the MFD only plots AIS targets out to a distance of ...Connect to the XB-8000 via USB or Wi-Fi. Once connected, choose human benchmark the "Configure Vessel Data" tab where current vessel details will be displayed. Enter the MMSI ... We are purchasing a boat with the following electronics. Nav Station Standard Horizon GX5500X VHF Garmin 128 GPS Signet Marine Depth Sounder ...
