Forum

Welcome to the Panbo Marine Technology Forums.

Notifications
Clear all

IPad Navigation

3 Posts
2 Users
0 Reactions
237 Views
Ian McLeod
(@angus99)
New Member
Joined: 4 weeks ago
Posts: 2
Topic starter  

Hi, all.  

I’ve had a long-term issue with iPads running Navionics and AquaMap.  Periodically, the maps will flip from heading up to one of the other orientations.  The boat icon will drift along in the general direction of the heading until I tap the orientation button to restore heading up. Typically, it will perform normally for a while, then revert to whatever it wants.

We’re running 12.9 inch, cellular iPads with internal GPS. I’ve tried them both with their internal GPS and connected to our Vesper AIS network. The latter works a bit better, but the problem still exists. Do I need a dedicated GPS receiver, like the Dual SkyPro XGPS160, or is there another problem I should look for?

Thanks in advance.


   
Quote
Ben Stein
(@ben-stein)
Estimable Member Admin
Joined: 7 years ago
Posts: 160
 

Ian,

 

I've seen some variation of this behavior but haven't run it down. Have you noticed, particularly in Aqua Maps as it clearly indicates when the app is using external GPS, if there is a change from internal to external GPS when this occurs? If you're seeing this behavior both with the iPad's internal GPS and with a TCP connected external source of position data, I don't think the trouble is going to be the GPS receiver itself. Hence, I doubt a Bluetooth GPS receiver would produce differing results.

 

-Ben S.

Publisher, Panbo.com


   
ReplyQuote
Ian McLeod
(@angus99)
New Member
Joined: 4 weeks ago
Posts: 2
Topic starter  

Ben, thanks for the feedback and fixing the posting issue.  I haven’t noticed whether it’s using internal or external when it does this.  I’ll pay better attention next time we’re on board.

Ian

 


   
ReplyQuote
Share: