Forum


Welcome to the Marine Electronics Forums presented by Panbo and SeaBits.

Notifications
Clear all

Simrad AIS 400 PWR/0183 connector

 

Tritone1962
(@tritone1962)
New Member
Joined: 4 years ago
Posts: 1
Topic starter  

Hello out there!

Is there anybody who could supply a pin-out from the above connector on the unit as I do not have the original cable?

Thanks a lot for caring!


Quote
Jonathan Udell
(@jonudell)
Active Member
Joined: 4 years ago
Posts: 8
 

Let me know if you are still looking for a cable for the NAIS400.  I likely have one.

 


ReplyQuote
Jeff Edstrom
(@talonawd91)
New Member
Joined: 3 years ago
Posts: 1
 

I'm in the same boat. The pinout would be a godsent but if you still have that cable I'd gladly buy it from you.


ReplyQuote
Jonathan Udell
(@jonudell)
Active Member
Joined: 4 years ago
Posts: 8
 

Jeff - I'm almost certain that I have a NAIS400 power/interface cable at the office, but I probably won't be back there until roughly 7/4.  Slammed with installs that have me away.  If you can wait until then I'm happy to send you one.  If you need it sooner I may not be able to help.

Feel free to move this to sidebar if you like :  [email protected]


ReplyQuote
Phil Begg
(@phil28)
New Member
Joined: 3 years ago
Posts: 1
 

Hey guys,

sorry for the rough drawing but see the pinout. Look at the NAIS500/400 manual for corresponding colours.

this is looking at female plug. (Cable side)

https://drive.google.com/file/d/1aaeAH6DygPSp7SCOkgf8o6TjAqb3-vpo/view?usp=drivesdk

This post was modified 3 years ago by Phil Begg

ReplyQuote
Share: