Forum

Scotty, In addition to being the publisher of Panbo I own the US reseller of Yacht Devices, so with that in mind I do have a little bit of a preferenc...

Hi Scotty, I believe you've got at least a couple of choices. One choice would be Raymarine's Seatalk to SeatalkNG converter (E22158) The manual for...

Please let us know how it works out. Ben

I don't have specific information on where to get the cable but I would start with Gemeco. Here's their page of information on the WX Station cables:...

Good news, Yacht Devices has come out with an alarm button. It's available here: (full disclosure: I am the owner of Yacht Devices US) and I belie...

James, Have you been able to check if it’s showing up as a device in your NMEA-2000 devices on your MFD? Also, just verifying when you refer to ...

Is this the first device on your NMEA 2000 network or do you have others? N2K is usually plug and play but if the network isn’t powered and properly...

Hartley, Very much appreciated. We don't allow any video ads. We do allow animated gifs that rotate through a few frames but that's as annoying as w...

That does sound like progress. I'm nearly certain the ethernet port on the WiFi-1 won't provide power. Also, if it's only for the purpose of keeping...

Bill, My strongest piece of advice is always to make sure that you have equipment you are comfortable using. The capabilities of the electronics onbo...

The thoughts I have that come to mind immediately are boat monitoring products. FloatHub has the ability to relay all or nearly all of the data menti...

Keaton, Thanks, if I understand your topology correctly you are outputting NMEA-2000 data using the NMEA-0183 formatting over TCP or UDP. That's a f...