Forum

You can go into the settings on the Axiom (settings->Network) and see what devices are connected, but that won't show you the physical layout of th...

Marcus, I didn't realize you were terminating your cable connection directly to the Netgear. That means your current Netgear router is doing double ...

I believe in 2001 it's likely your engine uses a MEFI-3 or MEFI-4 ECU. The only gateway I know of that works with MEFI controllers earlier than the ME...

Marcus, You have a couple of choices. One, and likely the cheapest, would be to replace the Netgear C7000 with a router capable of multiple conn...

It's my understanding (though I haven't tried it with a touch screen) that the one USB-C connection should be all you need. While I don't know ...

Hi Cappy, What year are your engines? Ben

Unfortunately your Garmin 94 SV Plus doesn't have ethernet connectivity so I don't think you're going to have any luck getting a camera on that displa...

Wayne, it's difficult to give generic answers in terms of which equipment you should buy based on what you have but there are some factors that can in...

Both those options would work well. There are other AIS transceivers with WiFi built in that would give you the same basic performance as option 2. Th...

Looks a little small.

@scottbee2 I think your complaint about the way most MFDs handle WiFi connectivity is spot on. Each of the MFDs I've used work in the manner you've ...

Scott, I'm looking forward to seeing what you've cooked up so far. Keep the updates coming. -Ben S.

A couple of thoughts for you though I should caution that while I'm very familiar with the electronics side of this equation you're quite possibly pla...

Sprokkie, With regards to the Yacht Devices YDCC not being seen by the Vulcan, did you enter the serial number of your YDCC when you built the CZone c...

AIS is one of a few categories of marine electronics for which there's really no benefit to matching the brand of your MFD and other electronics. With...